This is a preview - click here to buy the full publication
®
IEC 62443-4-1
Edition 1.0 2018-01
INTERNATIONAL
STANDARD
colour
inside
Security for industrial automation and control systems –
Part 4-1: Secure product development lifecycle requirements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.030
ISBN 978-2-8322-5239-0
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
This is a preview - click here to buy the full publication
–2–
IEC 62443-4-1:2018 © IEC 2018
CONTENTS
FOREWORD ........................................................................................................................... 6
INTRODUCTION ..................................................................................................................... 8
1
Scope ............................................................................................................................ 11
2
Normative references .................................................................................................... 11
3
Terms, definitions, abbreviated terms, acronyms and conventions ................................. 11
3.1
Terms and definitions ............................................................................................ 11
3.2
Abbreviated terms and acronyms .......................................................................... 16
3.3
Conventions .......................................................................................................... 17
4
General principles ......................................................................................................... 17
4.1
Concepts .............................................................................................................. 17
4.2
Maturity model ...................................................................................................... 19
5
Practice 1 – Security management ................................................................................ 20
5.1
Purpose ................................................................................................................ 20
5.2
SM-1: Development process ................................................................................. 21
5.2.1
Requirement .................................................................................................. 21
5.3
Rationale and supplemental guidance ................................................................... 21
5.4
SM-2: Identification of responsibilities ................................................................... 21
5.4.1
Requirement .................................................................................................. 21
5.4.2
Rationale and supplemental guidance............................................................ 21
5.5
SM-3: Identification of applicability ........................................................................ 21
5.5.1
Requirement .................................................................................................. 21
5.5.2
Rationale and supplemental guidance............................................................ 22
5.6
SM-4: Security expertise ....................................................................................... 22
5.6.1
Requirement .................................................................................................. 22
5.6.2
Rationale and supplemental guidance............................................................ 22
5.7
SM-5: Process scoping ......................................................................................... 22
5.7.1
Requirement .................................................................................................. 22
5.7.2
Rationale and supplemental guidance............................................................ 23
5.8
SM-6: File integrity ................................................................................................ 23
5.8.1
Requirement .................................................................................................. 23
5.8.2
Rationale and supplemental guidance............................................................ 23
5.9
SM-7: Development environment security ............................................................. 23
5.9.1
Requirement .................................................................................................. 23
5.9.2
Rationale and supplemental guidance............................................................ 23
5.10 SM-8: Controls for private keys ............................................................................. 23
5.10.1
Requirement .................................................................................................. 23
5.10.2
Rationale and supplemental guidance............................................................ 24
5.11 SM-9: Security requirements for externally provided components .......................... 24
5.11.1
Requirement .................................................................................................. 24
5.11.2
Rationale and supplemental guidance............................................................ 24
5.12 SM-10: Custom developed components from third-party suppliers ........................ 24
5.12.1
Requirement .................................................................................................. 24
5.12.2
Rationale and supplemental guidance............................................................ 25
5.13 SM-11: Assessing and addressing security-related issues .................................... 25
5.13.1
Requirement .................................................................................................. 25
5.13.2
Rationale and supplemental guidance............................................................ 25
This is a preview - click here to buy the full publication
IEC 62443-4-1:2018 © IEC 2018
–3–
5.14 SM-12: Process verification .................................................................................. 25
5.14.1
Requirement .................................................................................................. 25
5.14.2
Rationale and supplemental guidance............................................................ 25
5.15 SM-13: Continuous improvement .......................................................................... 25
5.15.1
Requirement .................................................................................................. 25
5.15.2
Rationale and supplemental guidance............................................................ 26
6
Practice 2 – Specification of security requirements ........................................................ 26
6.1
Purpose ................................................................................................................ 26
6.2
SR-1: Product security context .............................................................................. 27
6.2.1
Requirement .................................................................................................. 27
6.2.2
Rationale and supplemental guidance............................................................ 27
6.3
SR-2: Threat model ............................................................................................... 27
6.3.1
Requirement .................................................................................................. 27
6.3.2
Rationale and supplemental guidance............................................................ 28
6.4
SR-3: Product security requirements ..................................................................... 28
6.4.1
Requirement .................................................................................................. 28
6.4.2
Rationale and supplemental guidance............................................................ 28
6.5
SR-4: Product security requirements content ........................................................ 29
6.5.1
Requirement .................................................................................................. 29
6.5.2
Rationale and supplemental guidance............................................................ 29
6.6
SR-5: Security requirements review ...................................................................... 29
6.6.1
Requirement .................................................................................................. 29
6.6.2
Rationale and supplemental guidance............................................................ 29
7
Practice 3 – Secure by design ....................................................................................... 30
7.1
Purpose ................................................................................................................ 30
7.2
SD-1: Secure design principles ............................................................................. 30
7.2.1
Requirement .................................................................................................. 30
7.2.2
Rationale and supplemental guidance............................................................ 30
7.3
SD-2: Defense in depth design.............................................................................. 31
7.3.1
Requirement .................................................................................................. 31
7.3.2
Rationale and supplemental guidance............................................................ 32
7.4
SD-3: Security design review ................................................................................ 32
7.4.1
Requirement .................................................................................................. 32
7.4.2
Rationale and supplemental guidance............................................................ 32
7.5
SD-4: Secure design best practices ...................................................................... 32
7.5.1
Requirement .................................................................................................. 32
7.5.2
Rationale and supplemental guidance............................................................ 33
8
Practice 4 – Secure implementation ............................................................................... 33
8.1
Purpose ................................................................................................................ 33
8.2
Applicability .......................................................................................................... 33
8.3
SI-1: Security implementation review .................................................................... 33
8.3.1
Requirement .................................................................................................. 33
8.3.2
Rationale and supplemental guidance............................................................ 34
8.4
SI-2: Secure coding standards .............................................................................. 34
8.4.1
Requirement .................................................................................................. 34
8.4.2
Rationale and supplemental guidance............................................................ 34
9
Practice 5 – Security verification and validation testing .................................................. 34
9.1
Purpose ................................................................................................................ 34
This is a preview - click here to buy the full publication
–4–
IEC 62443-4-1:2018 © IEC 2018
9.2
SVV-1: Security requirements testing .................................................................... 35
9.2.1
Requirement .................................................................................................. 35
9.2.2
Rationale and supplemental guidance............................................................ 35
9.3
SVV-2: Threat mitigation testing ............................................................................ 35
9.3.1
Requirement .................................................................................................. 35
9.3.2
Rationale and supplemental guidance............................................................ 35
9.4
SVV-3: Vulnerability testing .................................................................................. 36
9.4.1
Requirement .................................................................................................. 36
9.4.2
Rationale and supplemental guidance............................................................ 36
9.5
SVV-4: Penetration testing .................................................................................... 36
9.5.1
Requirement .................................................................................................. 36
9.5.2
Rationale and supplemental guidance............................................................ 36
9.6
SVV-5: Independence of testers ............................................................................ 37
9.6.1
Requirement .................................................................................................. 37
9.6.2
Rationale and supplemental guidance............................................................ 37
10 Practice 6 – Management of security-related issues ...................................................... 38
10.1 Purpose ................................................................................................................ 38
10.2 DM-1: Receiving notifications of security-related issues ........................................ 38
10.2.1
Requirement .................................................................................................. 38
10.2.2
Rationale and supplemental guidance............................................................ 38
10.3 DM-2: Reviewing security-related issues ............................................................... 38
10.3.1
Requirement .................................................................................................. 38
10.3.2
Rationale and supplemental guidance............................................................ 39
10.4 DM-3: Assessing security-related issues ............................................................... 39
10.4.1
Requirement .................................................................................................. 39
10.4.2
Rationale and supplemental guidance............................................................ 39
10.5 DM-4: Addressing security-related issues ............................................................. 40
10.5.1
Requirement .................................................................................................. 40
10.5.2
Rationale and supplemental guidance............................................................ 40
10.6 DM-5: Disclosing security-related issues ............................................................... 41
10.6.1
Requirement .................................................................................................. 41
10.6.2
Rationale and supplemental guidance............................................................ 41
10.7 DM-6: Periodic review of security defect management practice ............................. 42
10.7.1
Requirement .................................................................................................. 42
10.7.2
Rationale and supplemental guidance............................................................ 42
11 Practice 7 – Security update management ..................................................................... 42
11.1 Purpose ................................................................................................................ 42
11.2 SUM-1: Security update qualification .................................................................... 42
11.2.1
Requirement .................................................................................................. 42
11.2.2
Rationale and supplemental guidance............................................................ 42
11.3 SUM-2: Security update documentation ................................................................ 42
11.3.1
Requirement .................................................................................................. 42
11.3.2
Rationale and supplemental guidance............................................................ 43
11.4 SUM-3: Dependent component or operating system security update
documentation ...................................................................................................... 43
11.4.1
Requirement .................................................................................................. 43
11.4.2
Rationale and supplemental guidance............................................................ 43
11.5 SUM-4: Security update delivery ........................................................................... 43
11.5.1
Requirement .................................................................................................. 43
This is a preview - click here to buy the full publication
IEC 62443-4-1:2018 © IEC 2018
–5–
11.5.2
Rationale and supplemental guidance............................................................ 43
11.6 SUM-5: Timely delivery of security patches ........................................................... 44
11.6.1
Requirement .................................................................................................. 44
11.6.2
Rationale and supplemental guidance............................................................ 44
12 Practice 8 – Security guidelines ..................................................................................... 44
12.1 Purpose ................................................................................................................ 44
12.2 SG-1: Product defense in depth ............................................................................ 44
12.2.1
Requirement .................................................................................................. 44
12.2.2
Rationale and supplemental guidance............................................................ 45
12.3 SG-2: Defense in depth measures expected in the environment ............................ 45
12.3.1
Requirement .................................................................................................. 45
12.3.2
Rationale and supplemental guidance............................................................ 45
12.4 SG-3: Security hardening guidelines ..................................................................... 45
12.4.1
Requirement .................................................................................................. 45
12.4.2
Rationale and supplemental guidance............................................................ 46
12.5 SG-4: Secure disposal guidelines ......................................................................... 46
12.5.1
Requirement .................................................................................................. 46
12.5.2
Rationale and supplemental guidance............................................................ 46
12.6 SG-5: Secure operation guidelines ........................................................................ 46
12.6.1
Requirement .................................................................................................. 46
12.6.2
Rationale and supplemental guidance............................................................ 47
12.7 SG-6: Account management guidelines ................................................................. 47
12.7.1
Requirement .................................................................................................. 47
12.7.2
Rationale and supplemental guidance............................................................ 47
12.8 SG-7: Documentation review ................................................................................. 47
12.8.1
Requirement .................................................................................................. 47
12.8.2
Rationale and supplemental guidance............................................................ 47
Annex A (informative) Possible metrics ................................................................................ 48
Annex B (informative) Table of requirements ....................................................................... 50
Bibliography .......................................................................................................................... 52
Figure 1 – Parts of the IEC 62443 series................................................................................. 9
Figure 2 – Example scope of product life-cycle ..................................................................... 10
Figure 3 – Defence in depth strategy is a key philosophy of the secure product life-cycle ..... 18
Table 1 – Maturity levels ....................................................................................................... 20
Table 2 – Example SDL continuous improvement activities ................................................... 26
Table 3 – Required level of independence of testers from developers ................................... 37
Table B.1 – Summary of all requirements .............................................................................. 50
This is a preview - click here to buy the full publication
–6–
IEC 62443-4-1:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SECURITY FOR INDUSTRIAL AUTOMATION
AND CONTROL SYSTEMS –
Part 4-1: Secure product development lifecycle requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62443-4-1 has been prepared by IEC technical committee 65:
Industrial-process measurement, control and automation.
The text of this International Standard is based on the following documents:
FDIS
Report on voting
65/685/FDIS
65/688/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This is a preview - click here to buy the full publication
IEC 62443-4-1:2018 © IEC 2018
–7–
A list of all parts in the IEC 62443 series, published under the general title Security for
industrial automation and control systems, can be found on the IEC website.
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
•
reconfirmed,
•
withdrawn,
•
replaced by a revised edition, or
•
amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
This is a preview - click here to buy the full publication
–8–
IEC 62443-4-1:2018 © IEC 2018
INTRODUCTION
This document is part of a series of standards that addresses the issue of security for
industrial automation and control systems (IACS). This document describes product
development life-cycle requirements related to cyber security for products intended for use in
the industrial automation and control systems environment and provides guidance on how to
meet the requirements described for each element.
This document has been developed in large part from the Secure Development Life-cycle
Assessment (SDLA) Certification Requirements [26] 1 from the ISA Security Compliance
Institute (ISCI). Note that the SDLA procedure was based on the following sources:
–
ISO/IEC 15408-3 (Common Criteria) [18];
–
Open Web Application Security Project (OWASP) Comprehensive, Lightweight Application
Security Process (CLASP) [36];
–
The Security Development Life-cycle by Michael Howard and Steve Lipner [43];
–
IEC 61508 Functional safety
safety-related systems [24], and
–
RCTA DO-178B Software Considerations in Airborne Systems and Equipment Certification
[28].
of
electrical/electronic/
programmable
electronic
Therefore, all these sources can be considered contributing sources to this document.
This document is the part of the IEC 62443 series that contains security requirements for
developers of any automation and control products where security is a concern.
Figure 1 illustrates the relationship of the different parts of IEC 62443 that were in existence
or planned as of the date of circulation of this document. Those that are normatively
referenced are included in the list of normative references in Clause 2, and those that are
referenced for informational purposes or that are in development are listed in the Bibliography.
___________
1
Figures in square brackets refer to the bibliography.
This is a preview - click here to buy the full publication
–9–
IEC TS 62443-1-1
IEC TR 62443-1-2
IEC TS 62443-1-3
IEC TR 62443-1-4
Terminology, concepts
and models
Master glossary of
terms and abbreviations
System security
compliance metrics
IACS security life-cycle
and use-cases
IEC 62443-2-1
IEC TR 62443-2-2
IEC TR 62443-2-3
IEC 62443-2-4
Establishing an industrial
automation and control
system security program
Implementation guidance
for an IACS security
management system
Patch management in
the IACS environment
Security program
requirements for IACS
service providers
IEC TR 62443-3-1
IEC 62443-3-2
IEC 62443-3-3
Security technologies
for industrial automation
and control systems
Security risk assessment
and system design
System security
requirements and
security levels
IEC 62443-4-1
IEC 62443-4-2
Product development
requirements
Technical security
requirements for IACS
components
Status
key
Component
System
Policies and
procedures
General
IEC 62443-4-1:2018 © IEC 2018
Published
In development
Development planned
Published (under review)
Out for comment/vote
Adoption planned
IEC
Figure 1 – Parts of the IEC 62443 series
Figure 2 illustrates how the developed product relates to maintenance and integration
capabilities defined in IEC 62443-2-4 and to its operation by the asset owner. The product
supplier develops products using a process compliant with this document. Those products
may be a single component, such as an embedded controller, or a group of components
working together as a system or subsystem. The products are then integrated together,
usually by a system integrator, into an Automation Solution using a process compliant with
IEC 62443-2-4. The Automation Solution is then installed at a particular site and becomes
part of the industrial automation and control system (IACS). Some of these capabilities
reference security measures defined in IEC 62443-3-3 [10] that the service provider ensures
are supported in the Automation Solution (either as product features or compensating
mechanisms). This document only addresses the process used for the development of the
product; it does not address design, installation or operation of the Automation Solution or
IACS.
In Figure 2, the Automation Solution is illustrated to contain one or more subsystems and
optional supporting components such as advanced control. The dashed boxes indicate that
these components are “optional”.
NOTE 1 Automation Solutions typically have a single product, but they are not restricted to do so. In some
industries, there may be a hierarchical product structure. In general, the Automation Solution is the set of hardware
and software, independent of product packaging, that is used to control a physical process (for example,
continuous or manufacturing) as defined by the asset owner.
NOTE 2 If a service provider provides products used in the Automation Solution, then the service provider is
fulfilling the role of product supplier in this diagram.
NOTE 3 If a service provider provides products used in the Automation Solution, then the service provider is
fulfilling the role of product supplier in this diagram.
This is a preview - click here to buy the full publication
– 10 –
IEC 62443-4-1:2018 © IEC 2018
Industrial automation and control system (IACS)
Asset
Owner
Operates (IEC 62443-2-1,
System
Integrator
Integrates (IEC 62443-2-4,
Operational and maintenance
capabilities (policies and procedures)
IEC 62443-2-4)
IEC 62443-3-2)
+
Automation Solution (IEC 62443-3-3)
Subsystem 1
Subsystem 2
Configured for intended environment
Includes a configured instance
Product
Supplier
Develops (IEC 62443-4-1)
Complementary
hardware and
software
components
of the Product
Product (IEC 62443-4-2)
system, subsystem, or component such as:
Applications
Embedded
devices
Network
components
Host
devices
Independent of the intended environment
IEC
Figure 2 – Example scope of product life-cycle
This is a preview - click here to buy the full publication
IEC 62443-4-1:2018 © IEC 2018
– 11 –
SECURITY FOR INDUSTRIAL AUTOMATION
AND CONTROL SYSTEMS –
Part 4-1: Secure product development lifecycle requirements
1
Scope
This part of IEC 62443 specifies process requirements for the secure development of
products used in industrial automation and control systems. It defines a secure development
life-cycle (SDL) for the purpose of developing and maintaining secure products. This life-cycle
includes security requirements definition, secure design, secure implementation (including
coding guidelines), verification and validation, defect management, patch management and
product end-of-life. These requirements can be applied to new or existing processes for
developing, maintaining and retiring hardware, software or firmware for new or existing
products. These requirements apply to the developer and maintainer of the product, but not to
the integrator or user of the product. A summary list of the requirements in this document can
be found in Annex B.
2
Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 62443-2-4:2015, Security for industrial automation and control systems – Part 2-4:
Security program requirements for IACS service providers
IEC 62443-2-4:2015/AMD1:2017
3
Terms, definitions, abbreviated terms, acronyms and conventions
3.1
Terms and definitions
For the purposes of this document, the terms and definitions given in IEC TR 62443-1-2 2 and
the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
•
IEC Electropedia: available at http://www.electropedia.org/
•
ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1
abuse case
test case used to perform negative operations of a use case
Note 1 to entry: Abuse case tests are simulated attacks often based on the threat model. An abuse case is a type
of complete interaction between a system and one or more actors where the results of the interaction are
intentionally intended to be harmful to the system, one of the actors or one of the stakeholders in the system.
___________
2
Under consideration.